uDrift

Join the uDrift tariff plan and get the opportunity to activate the package only in the months when you need more internet than usual.

To activate the prepaid mobile internet service, send a blank SMS to 3505, after which the services are activated immediately.
The validity period of the uDrift prepaid mobile internet tariff plan package is 720 hours. The package inclusions are automatically renewed after the internet inclusions are used up or the validity period expires, provided there is sufficient balance in the account. The inclusions provided within the tariff plan/package can be used after receiving the confirmation SMS/notification.
For prepaid tariff plans, due to the lifecycle, reactivations are dependent on top-ups. Once the account is topped up, the number is activated immediately.
When topping up, the active days corresponding to the top-up amount will be added to the card's current active period. For example, if your card's active period ends on May 15 and you top up 1,000 AMD on May 1, the active period will be extended to June 15 (i.e., May 15 plus 31 days)

During the passive period, outgoing services are blocked and only incoming services remain available. Any balance remaining in your account during the passive period will be saved and added to your next top-up amount.
After the passive period ends, you still have the opportunity to top up your account and keep your number within 1 month (31 days). Otherwise, you will lose your phone number and the balance remaining in your account.
Within the uDrift tariff plan, you can also send SMS to all local networks at the rate of 15 AMD/SMS. You just need to have sufficient balance on your account.
SMS to international destinations are not available for mobile internet users.

The mobile internet speed provided to a subscriber under a tariff plan is determined by the technology of the base station the subscriber is connected to, as well as the parameters of the device used by the subscriber. Information on speeds by technology type is available at the following link: ucom.am

The conditions considered to realistically enable the maximum (advertised) data transfer speed are: the subscriber is connected to a lightly loaded base station and obstacles between the subscriber and the station are minimal. Factors affecting maximum speed are available at the following link: ucom.am (General terms and conditions).